Settings for Piezo/switch hihats

[slayer666]

I see this:

choked-decimal-midiox.JPG

choked-midiox.JPG

[dmitri]

I see this:

choked-decimal-midiox.JPG

choked-midiox.JPG

Thank you, slayer666! Just as it should be!

[slayer666]

I see this:

choked-decimal-midiox.JPG

choked-midiox.JPG

Thank you, slayer666! Just as it should be!

np, just doing what I can to help

[Beamtreetaker]

Thanks for your efforts very very much. But I seem to have found the solution for the problem. It seems that the inversion of my aftertouch messages was due to the settings of the gain paramaters. I (accidentally to be honest) set gain to 0 for the bow (piezo) and 1 for the edge (switch), and then it worked. (And HOW it worked, it's fantastic! Unfortunately it's night now and I can't play a little louder....)

It's my missing understanding of how exactly the algorithm of especially the switch on/off detection works that prevents me from understanding WHY the gain parameter affects the switch interpretation in such a way, but as long as the result is right, I am more than happy! Dmitri, I hope these findings will help you reconstructing this issue.

[dmitri]

Threshold for the switch input should be around 15-20. Gain for the switch input MUST be left at 4 - maybe I need to enforce it in firmware.

[Beamtreetaker]

I found that just setting the switch's (edge) gain from 4 to 3 (as only change) solves my problem of aftertouch inversion.

My threshold values are 20 (bow) and 11 (edge) and it works very well. Just when I hit the cymbal hard there is some overspilling which I'm going to fix soon.