Custom Curves

Discussions related to MegaDrum Hardware

Re: Custom Curves

Postby airflamesred » Sun Jul 21, 2013 1:38 pm

For example, a single piezo is connected to both the head and rim.

The linear curve, on the head, as shown could be a snare.

The other curve could be a rim shot. Only need that to come in at high velocity.

The low value for any curve is 2, but this is still triggering a sound, albeit at low volume.

Are there practical reasons for this value being 2 rather than 0?

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1201
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Custom Curves

Postby airflamesred » Sun Jul 21, 2013 1:41 pm

Sorry cross post.

So 2 is the lowest?. Still getting a sound so I need to program this out elsewhere?

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1201
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Custom Curves

Postby dmitri » Sun Jul 21, 2013 4:56 pm

airflamesred wrote:Are there practical reasons for this value being 2 rather than 0?

Yes. If you don't want a piezo to trigger a sound for low velocity hits, look at the Cut Off function in http://www.megadrum.info/content/pads-settings
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Custom Curves

Postby airflamesred » Sun Jul 21, 2013 5:17 pm

Fair point. I shall have a closer look at that.

So the anote value equates to a (secondary threshold) velocity?

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1201
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Custom Curves

Postby dmitri » Sun Jul 21, 2013 6:42 pm

When set to CutOff the 'ANote' setting changes it meaning to 'cut off' level - hits with velocities below level set in 'ANote' will not trigger Note On/Off messages.

Should it be re-phrased differently?
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Custom Curves

Postby airflamesred » Sun Jul 21, 2013 7:54 pm

After a couple of readings it clicked. I think 'cut off' led me to think it was something else.

Yet another great feature.

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1201
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Custom Curves

Postby airflamesred » Sat Aug 03, 2013 10:16 pm

Just a thought Dmitri, would it be easier to simplify the names to say 'curve 1', 'curve 2' etc?

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1201
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Custom Curves

Postby dmitri » Sat Aug 03, 2013 11:29 pm

I don't know. I think it's still helpful to have some meaningful names for the first 12 curves even though they are now fully custom - you just first choose a curve which is closest to your need and you adjust it slightly. If none of the first 12 curves is close to what you need you choose one of the last 4 curves.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Previous

Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 87 guests