Yamaha DTXtreme IIs Kit to set up. Help !!!

Discussions related to MegaDrum Hardware

Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Wed Aug 14, 2013 12:20 pm

Hi,

I am trying to set up my Drumkit with both megadrum manager and the box itself, but I cant get nothing good.
I would like help !!!

First, to set the 3 way pads to work propely (TP 120 SD / TP 100 / PCY 150s)
Second, to set the Hihat pedal.
Third, to set crostalk, 'cause when I it a drum, all drums gives signal !

So, I pluged only Kick and snare to try setting up those two before going further.

If you already set up this kind of pads, please give me your tips !!!

Charly
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby airflamesred » Wed Aug 14, 2013 12:28 pm


koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1201
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby angr77 » Wed Aug 14, 2013 10:27 pm

Hi.

I have the PCY-150 configured in my library ... ready for downloads!

http://powerhell.wordpress.com/about/zo ... d-library/

Angr77
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby dmitri » Thu Aug 15, 2013 1:50 pm

Did you configure any of the pads/cymbals?
Did you use http://www.megadrum.info/content/settin ... one-cymbal as a guide for setting it up?
What settings did you end up with?
What is wrong with the pad/cymbal with these settings?
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Fri Aug 16, 2013 10:23 am

Thanks for all replies I have just seen !

I have to try all those solutions before giving more information.
I will especially try the PCY 150 Settings. The standard procedure for Snare didn't work at all, and I get all three zones giving a rim note. I will try it again anyway.

I come back this evening. Thanks

Charly
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Fri Aug 16, 2013 10:22 pm

Hi again.

So, I did try all solutions you given me, and none works.
You do not have the required permissions to view the files attached to this post.
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Fri Aug 16, 2013 10:28 pm

On the last post, u can see the ride parameters, that are provided by angr77, and that should work.
As u can seen, what I get isn't the expected. I hit the bell, the bow, and the edge one time

And so here is the snare parameters I did by myself few days ago, and the results are almost the same than the ride today.
I hit the head, the rim1 and rim 2 two times.

Also, I did do the dmiti's provided procedure to set the bells and edges.
You do not have the required permissions to view the files attached to this post.
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Fri Aug 16, 2013 10:31 pm

I spend 10 hours to make it to work, before asking help.
I should have found solutions by less than this time.

So, I suppose there is a problem in the module itself. I tryed many things, but none gave the expected results.

I wait for your expertise, dmitri.

Thanks
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby dmitri » Fri Aug 16, 2013 10:49 pm

I'm presuming you're trying to configure PCY-150s in the Snare jack.
Forget about MDM for now and do what I suggested in my previous post, i.e. follow http://www.megadrum.info/content/settin ... one-cymbal

What settings did you end up with? (Threshold and BThreshold on the SnareR input in particular)
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Fri Aug 16, 2013 11:20 pm

No, the ride is in the ride jack, and the snare in the snare jack. But I'll put only the ride jack to see whet happen.

You ask me to do everything on the module itself, isnt it ?
Threshold and BTreshold is the parameter you can find it MDM as well, no ?

I go on the studio to do the procedure again, and I tell u the results right after.
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Next

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 76 guests