Yamaha DTXtreme IIs Kit to set up. Help !!!

Discussions related to MegaDrum Hardware

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby dmitri » Fri Aug 23, 2013 3:07 pm

Charly, can you please test this firmware:
megadrum_20130823.zip


I've added a new pedal parameter called ChickThrsh. As with ShrtChckTh LngChckTh it is measured against Pedal CC values so a value 127 corresponds to fully closed and a value 0 corresponds to fully open.
You do not have the required permissions to view the files attached to this post.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Fri Aug 23, 2013 3:59 pm

Wow ! So quick !

I'll test it this night and I tell you right after.

Thanks !
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby angr77 » Fri Aug 23, 2013 5:00 pm

Hi!

Just for reference...are the configured pads in the MDS file the following?

TP120SD (1), TP100 (4), PCY150S (1), PCY130S (1), PCY130 (1), RHH130 (1) KP65 (1)

Best Regards

Angr77
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Fri Aug 23, 2013 5:13 pm

Correct !

The PCY130 is on Aux 1 Input

Charly
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Fri Aug 23, 2013 10:12 pm

I've added a new pedal parameter called ChickThrsh. As with ShrtChckTh LngChckTh it is measured against Pedal CC values so a value 127 corresponds to fully closed and a value 0 corresponds to fully open.


Excellent work !!! It works exactly as expected !

At the beggining, I almost came to say you "sorry but it didnt work", but I felt that something went wrong.
So I watched the Hats notes, and it has moved by one step. Let me explain :

Before : After
BowOpen= 81 BowOpen=83
EdgeOper=83 EdgeOpen=0
BellOpen=0 BellOpen=81
ect ....

I am not exactly sure now that this exemple match the real change, but you understand that inserting a new parameter has changed communication with MDM.
Whatever, I made the good settings back, and so I used ChickThreshold. Set to 110; now I get chick when I close pedal. And If I press more, I get my Thight Closed Sound.
Excellent !!!

Thanks Dmitri.
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby dmitri » Fri Aug 23, 2013 10:35 pm

CharlySombreCoeur wrote:I am not exactly sure now that this exemple match the real change, but you understand that inserting a new parameter has changed communication with MDM.

This new feature is not implemented in MDM yet so you have to set it manually via menu. Also, when you set ChickThrsh, ShrtChckTh and LngChckTh make sure that ChickThrsh is greater than ShrtChckTh, and ShrtChckTh is greater than LngChckTh
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Sat Aug 24, 2013 2:41 am

By greater, you mean a lower number, correct ?

I dont understand enough those parameters. What I know is when I set ShortChickTh (100)close to Chickth (110), it is easyer to get splashes. When I set LongChickTh too low (30), I cannot get high velocity chicks.

Charly
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby dmitri » Sat Aug 24, 2013 10:48 am

CharlySombreCoeur wrote:By greater, you mean a lower number, correct ?

Greater means bigger/higher number.

I dont understand enough those parameters. What I know is when I set ShortChickTh (100)close to Chickth (110), it is easyer to get splashes. When I set LongChickTh too low (30), I cannot get high velocity chicks.

This is expected behavior. The lower LongChickTh the harder it is to get high velocity chicks.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby CharlySombreCoeur » Sat Aug 24, 2013 11:08 am

Yes greater, my mistake !

So I have ChickTrsh set to 110. ShortChickTrsh Should be somewhere between 70 & 108, and I can expect that if I press the pedal from this value, I will get a 64max velocity chick, right ?
And LongChickTrsh should be somewhere between 10 & 65. As well than Short, I can expect a 128max velocity if I press the pedal from this value, ?

If I understood right, the problem is about LongChick. If I set it to 50, I cannot get chicks with Higher velocity than 64. That is why I am sure that there's something I dont understand. Maybe it is linked to my hihat "technology".

Yesterday, I did look inside the pad, and it is a poor built thing. But it is also one of the first hihat that fits onto real hat stand, so ...
CharlySombreCoeur
 
Posts: 42
Joined: Wed Apr 03, 2013 10:32 pm

Re: Yamaha DTXtreme IIs Kit to set up. Help !!!

Postby dmitri » Sat Aug 24, 2013 11:58 am

CharlySombreCoeur wrote:Yes greater, my mistake !

So I have ChickTrsh set to 110. ShortChickTrsh Should be somewhere between 70 & 108, and I can expect that if I press the pedal from this value, I will get a 64max velocity chick, right ?
And LongChickTrsh should be somewhere between 10 & 65. As well than Short, I can expect a 128max velocity if I press the pedal from this value, ?

If I understood right, the problem is about LongChick. If I set it to 50, I cannot get chicks with Higher velocity than 64. That is why I am sure that there's something I dont understand. Maybe it is linked to my hihat "technology".

With your settings. If the initial position is between 110 and (70 & 108) you will not get chick at all. If the initial position is between (70 & 108) and (10 & 65) you will get a soft chick. If the initial position is between (10 & 65) and 0 you will get a hard chick.
dmitri
Site Admin
 
Posts: 8709
Joined: Fri Aug 03, 2007 8:05 pm

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 86 guests