Please can someone give me the exact key presses I need to get to change the megadrum speed to USB only.
This is not ideal but I cannot get my LCD working, and as I will be parting ways with my unfinished megadrum soon I would at least like to get this right before I do so.
Key press
23 posts
• Page 1 of 3 • 1, 2, 3
Re: Key press
by dmitri » Sat Feb 22, 2014 11:45 am
After powering up.
USB only 1: LEFT, RIGHT, RIGHT, UP
USB only 2: LEFT, RIGHT, RIGHT, UP, UP
USB only 3: LEFT, RIGHT, RIGHT, UP, UP, UP
USB only 1: LEFT, RIGHT, RIGHT, UP
USB only 2: LEFT, RIGHT, RIGHT, UP, UP
USB only 3: LEFT, RIGHT, RIGHT, UP, UP, UP
- dmitri
- Site Admin
- Posts: 8709
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Key press
by G-Man » Sat Feb 22, 2014 1:22 pm
Thanks Dmitri
I have tried all 3 and I still get sysex timeouts on 96% when trying to save to slot or send all.
I am using a powered hub as suggested by a few others and still no luck.
Anything else I can try?
I have tried all 3 and I still get sysex timeouts on 96% when trying to save to slot or send all.
I am using a powered hub as suggested by a few others and still no luck.
Anything else I can try?
- G-Man
- Posts: 59
- Joined: Fri Aug 23, 2013 7:07 pm
Re: Key press
by G-Man » Sat Feb 22, 2014 1:33 pm
Can anything be measured on the LCD controller to check that all is ok on the megadrum board?
- G-Man
- Posts: 59
- Joined: Fri Aug 23, 2013 7:07 pm
Re: Key press
by G-Man » Sat Feb 22, 2014 2:43 pm
What do I press afterwards to ensure that the speed has saved?
- G-Man
- Posts: 59
- Joined: Fri Aug 23, 2013 7:07 pm
Re: Key press
by dmitri » Sat Feb 22, 2014 3:27 pm
Provided no inputs are triggering, just wait for 10 seconds to make sure it exits the menu.
- dmitri
- Site Admin
- Posts: 8709
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Key press
by G-Man » Sun Feb 23, 2014 8:01 am
Just to confirm, when going through the 3 options does the midi led light up briefly on each option? If so then I have definitely tried all 3 speeds with no effect.
Would you be willing to allow me to post it back to you for diagnosis and repair and send it back with a working lcd?
The drummer in our band is going to be taking my megadrum and kit that I have made as I am moving and cannot take it with me. I'd like to give him something that works because I have had no luck recently.
Would you be willing to allow me to post it back to you for diagnosis and repair and send it back with a working lcd?
The drummer in our band is going to be taking my megadrum and kit that I have made as I am moving and cannot take it with me. I'd like to give him something that works because I have had no luck recently.
- G-Man
- Posts: 59
- Joined: Fri Aug 23, 2013 7:07 pm
Re: Key press
by dmitri » Sun Feb 23, 2014 11:16 am
G-Man wrote:Just to confirm, when going through the 3 options does the midi led light up briefly on each option? If so then I have definitely tried all 3 speeds with no effect.
Yes, it does. It sends a MIDI message from Atmega to PIC.
Would you be willing to allow me to post it back to you for diagnosis and repair and send it back with a working lcd?
You can send it for diagnosis. If it needs a repair it may cost up to to the cost of the board which is 65GBP. The LCD comes only with Basic and Full kit and I will not add it to a Minimal discounted kit.
- dmitri
- Site Admin
- Posts: 8709
- Joined: Fri Aug 03, 2007 8:05 pm
23 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: Google [Bot] and 83 guests