Firmware version to test.

[dmitri]

This is an illustration of compression levels from 0 (top line) to 7 (bottom line) on hits with a linear curve:

compress.png

This is an illustration of level shift from 0 (bottom line) to 56 (top line) on hits with a linear curve and a compression level 7:

compress+shift.png

[elrules]

Simply great

[dmitri]

The new firmware with all these new features has been released and can be downloaded in the usual place.

[Synthex]

Is it possible to automatically assign a SysEx Chain ID for each link ?

[dmitri]

Is it possible to automatically assign a SysEx Chain ID for each link ?

What do you mean?

[Synthex]

Is it possible to automatically assign a SysEx Chain ID for each link ?

What do you mean?

People who chain several Megadrum don't want to install LCD screen or keyboard.
So it is difficult to indicate the ID number on the Megadrum menu.

[dmitri]

I will do it. I will probably use one of LCD pins for this.

[Synthex]

I will do it. I will probably use one of LCD pins for this.

It's possible to do it by software and not by hardware.
It would be nice!

[dmitri]

I will do it. I will probably use one of LCD pins for this.

It's possible to do it by software and not by hardware.
It would be nice!

Two firmwares with different IDs pre-defined?

[Synthex]

I will do it. I will probably use one of LCD pins for this.

It's possible to do it by software and not by hardware.
It would be nice!

Two firmwares with different IDs pre-defined?

No, this would be done automatically.
At startup, each megadrum sending a message to his father in the chain, so each megadrum can position itself in the chain and have a unique ID.