Yamaha RHH135 Controller
26 posts
• Page 1 of 3 • 1, 2, 3
Yamaha RHH135 Controller
by AndyB » Sat Jun 18, 2016 3:33 am
Hello everyone. I am hoping someone can tell me what I am doing wrong. I managed to start to get the Yamaha RHH135 hats to work. Not great but I have them. But the Controller...I get no response from. I posted some pics. I would appreciate Any help from experienced users of these hats and controller. Even setting suggestions better for sensitivity would be a great help. I based the set up of the pad and controller on this. https://www.dropbox.com/s/inkamgrcvminf ... 5pedal.PNG Thanks Guys. Andy
You do not have the required permissions to view the files attached to this post.
- AndyB
- Posts: 70
- Joined: Sat Apr 23, 2016 2:34 pm
Re: Yamaha RHH135 Controller
by dmitri » Sat Jun 18, 2016 6:18 am
MegaDrum modules by default use Roland's HiHat polarity unless I'm told to build it with Yamaha polarity. You can use a crossover cable to convert you Yamaha to Hihat polarity to Roland polarity.
- dmitri
- Site Admin
- Posts: 8706
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Yamaha RHH135 Controller
by AndyB » Sat Jun 18, 2016 11:27 am
What is a crossover cable can you point me out an example? Dmitri I read somewhere that for FSR (Aquarian on-head & on-head pads) you do not need their in-box is this true? Or is it only on certain channels?
- AndyB
- Posts: 70
- Joined: Sat Apr 23, 2016 2:34 pm
Re: Yamaha RHH135 Controller
by dmitri » Sat Jun 18, 2016 7:16 pm
AndyB wrote:What is a crossover cable can you point me out an example?
A crossover cable is a cable where tip from one end goes to ring on the other end and vice versa.
Dmitri I read somewhere that for FSR (Aquarian on-head & on-head pads) you do not need their in-box is this true? Or is it only on certain channels?
FSR requires a power source. If this is what "in-box" does then you need it.
- dmitri
- Site Admin
- Posts: 8706
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Yamaha RHH135 Controller
by AndyB » Sat Jun 18, 2016 7:54 pm
Yes that's what the inbox does. For the cable..i only need to change one side that goes into the megadrum module correct?
- AndyB
- Posts: 70
- Joined: Sat Apr 23, 2016 2:34 pm
Re: Yamaha RHH135 Controller
by dmitri » Sun Jun 19, 2016 6:50 am
Yes, you change tip and ring wires only at one end.
- dmitri
- Site Admin
- Posts: 8706
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Yamaha RHH135 Controller
by AndyB » Sun Jun 19, 2016 2:57 pm
I tried the switch. Not successful Will try again.
- AndyB
- Posts: 70
- Joined: Sat Apr 23, 2016 2:34 pm
Re: Yamaha RHH135 Controller
by AndyB » Wed Jun 22, 2016 2:14 pm
Well we redid this twice and with the scope it looks like it's correct but still doesn't work. Is there a setting wrong in my MDM pics?
- AndyB
- Posts: 70
- Joined: Sat Apr 23, 2016 2:34 pm
Re: Yamaha RHH135 Controller
by airflamesred » Wed Jun 22, 2016 4:10 pm
AndyB wrote:Well we redid this twice and with the scope it looks like it's correct but still doesn't work. Is there a setting wrong in my MDM pics?
Well, If you re did this twice you would be back to the start, surely?I don't get why you need a scope to reverse 2 wires. I'm lost.
koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
- airflamesred
- Posts: 1197
- Joined: Fri Mar 30, 2012 1:58 pm
- Location: Hammersmith
Re: Yamaha RHH135 Controller
by AndyB » Wed Jun 22, 2016 4:11 pm
Would this be correct?
You do not have the required permissions to view the files attached to this post.
- AndyB
- Posts: 70
- Joined: Sat Apr 23, 2016 2:34 pm
26 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: Google [Bot] and 112 guests