winpic800 issue

[brice]

any idea why winpic doesn't display the hex firmware properly?

[dmitri]

Probably winpic800 is trying to be smart and does MCU(CPU) specific byte ordering. Or vice versa.

[Synthex]

For me all is right (with 3.63c too) :

WinPic800.jpg

[brice]

I tried on 3 different pc's xp and vista, same issue.

can you send me your WPic800.ini file?

[Synthex]

I tried on 3 different pc's xp and vista, same issue.

can you send me your WPic800.ini file?

[Parametros]
Pic_10F=0
Pic_12F=0
Pic_16F=0
Pic_18F=26
Pic_18FJ=0
Pic_30F=0
Pic_33F=0
Pic_24F=0
Pic_24H=0
Pic_16C=0
I2C=0
I2C_M=0
SPI_93XX=0
AVR=12
Dev=14
M_30_ICSP=0
ClosW=0
InitDir=O:\# MegaDrum\MegaDrum32 Firmware\megadrum32_20080702
TPH=GTP-USB [Plus]
CSOFT_index=0
VDurante=1
VDespues=0
PMsgs=0
AutoPic=1
AutoSel=0
Reabrir=1
Datos_Direccion_X_2=1
Info_Down=1
AT_programming_PARALLEL=0
AT_programming_HIGH_SERIAL=0
AT_programming_LOW_SERIAL=1
AT_LEER_PROGRAMAR_CONFIG=0
AT_swap_and_words=0
Borrar_chip=0
Prog_Codigo=1
Prog_Datos=1
Prog_Config=1
Reabrir_ultimo_hex=0
Mostrar_icon_P=0
RESPETA_EEPROM=0
CBytes=8
CModo=0
left=390
top=194
Pic_32MX=0
Mostrar_Nemonico=1
Width=633
Height=482
Maximized=0
Pic32_Modo_2_Wire=1
[Recientes]
f=O:\# MegaDrum\MegaDrum32 Firmware\megadrum32_20080702\megadrum644_20_32_20080702.hex|
[Auto_ID]
Nombre=Default
Usar_Auto_ID=0

[brice]

ok, that worked, thank you