Do triggers and pads make a difference in performance?

Discussions related to MegaDrum Hardware

Do triggers and pads make a difference in performance?

Postby Beatmachinery » Fri Nov 17, 2017 6:25 am

Hello , just wanted to know...

I´m really tempted to get a megadrum module (cause of its great latency performance and possibilities) but I have own a Yamaha DTX502 drumset.

I would replace my actual drum module with a megadrum one , but my question is: Do yamaha ( or any other brand pads , triggers or piezos) affect the latency performance? I mean... Are there better triggers or pads to get out the most of the megadrum module?

Is the performance directly affected by the brand or kind of triggers you are using? or it really depends on the module entirely?

Thanks!
Beatmachinery
 
Posts: 7
Joined: Wed Oct 18, 2017 1:55 am

Re: Do triggers and pads make a difference in performance?

Postby airflamesred » Fri Nov 17, 2017 7:40 am

What are you planning on moving to. Megadrum plus what?

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1197
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Do triggers and pads make a difference in performance?

Postby Beatmachinery » Fri Nov 17, 2017 1:36 pm

airflamesred wrote:What are you planning on moving to. Megadrum plus what?


Exactly... thats the point.

I dont know if its "ok" to stay with the yamaha rubber pads or to move to another kind of pads with a better response.

What would you suggest to me?
Beatmachinery
 
Posts: 7
Joined: Wed Oct 18, 2017 1:55 am

Re: Do triggers and pads make a difference in performance?

Postby ignotus » Fri Nov 17, 2017 1:44 pm

In theory rubber pads would allow you to get lower latency (maybe a couple of milliseconds) as they can use a lower scan time in the module. Whether you prefer rubber or mesh pads for the feel is up to you. Most of the latency, however, is going to depend on the computer and sound card you use.
If it ain't broken... fix it until it is.
ignotus
 
Posts: 882
Joined: Sat Nov 24, 2007 11:36 am

Re: Do triggers and pads make a difference in performance?

Postby Beatmachinery » Fri Nov 17, 2017 2:37 pm

So it does not really matter if I use any brand or if I choose between mesh and rubber pads?

I´ve heared that latency comes also from the module but I was not sure if that has to be with audio and not to MIDI.

I´ll be using an RME PCIe card and Core i7 8700.

But Im not sure if its better to have a faster CPU (7700K for example) or One with more cores like the 8700.
Beatmachinery
 
Posts: 7
Joined: Wed Oct 18, 2017 1:55 am

Re: Do triggers and pads make a difference in performance?

Postby ignotus » Fri Nov 17, 2017 3:21 pm

Almost any pad will work - I'd choose them based on what you prefer playing with.

Yes, latency differs among modules but Megadrum is among the fastest out there, so I wouldn't worry about that.

That audio card and PC setup will work great. I don't think you need a particularly fast CPU or one with loads of cores for low latency - a good sound card is more important.
If it ain't broken... fix it until it is.
ignotus
 
Posts: 882
Joined: Sat Nov 24, 2007 11:36 am

Re: Do triggers and pads make a difference in performance?

Postby sbonasuk » Fri Nov 17, 2017 5:11 pm

As earlier posted by ignotus, megadrum latency is minimal, the power of the PC is also not really an issue, however the sound card makes a huge difference. for example I changed to an external SCARLETT SOLO audio unit from focusrite and I get 0.7 second latency.

As for rubber pads, move to a mesh head
sbonasuk
 
Posts: 119
Joined: Fri Jun 17, 2011 10:37 pm

Re: Do triggers and pads make a difference in performance?

Postby airflamesred » Fri Nov 17, 2017 6:55 pm

Rubber vs mesh is up to you its a feel thing. PC specs don't really have e to much influence unless you really try to stream thousands of samples simultaneously, difficult on a drum kit.

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1197
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith


Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 100 guests