snare with strainer switch

Discussions related to MegaDrum Hardware

snare with strainer switch

Postby sixbras » Tue Nov 14, 2017 11:33 am

Hey.

Does anybody already made a setup with a strainer switch, that can trigger the snare with or without wires in VST ?

I think it could be a could feature and i looking for the best way to do it with my MD configuration.
sixbras
 
Posts: 6
Joined: Thu Jun 02, 2016 9:12 am

Re: snare with strainer switch

Postby lrizzo2001 » Fri Nov 17, 2017 6:47 pm

I think I'm understanding your question. You want to be able to flip a switch of some kind to create the effect of turning off the Snares on a Snare Drum? If that's the case, the only thing I can think of is to have 2 separate sets of outputs connected to the same piezo with a manual switch to toggle between the outputs, have 1 output going to your snare input on MD, and the 2nd going to an AUX input on MD then simply assign the Aux input to the Sample of the Snare Drum with no Snares (if available).
lrizzo2001
 
Posts: 95
Joined: Fri Oct 20, 2017 5:56 pm
Location: jacksonville fl

Re: snare with strainer switch

Postby karlarsch » Sat Nov 18, 2017 2:42 pm

This is a real interesting topic, wonder, if it´s possible to change the output-note (or the whole set) via input-event into Megadrum either by a pedal or an input-impuls to a program-change defined physical input. Maybe Dmitri can give us a helpful hint.
Best regards, Karl
karlarsch
 
Posts: 18
Joined: Tue Apr 01, 2014 3:25 pm

Re: snare with strainer switch

Postby airflamesred » Sat Nov 18, 2017 7:20 pm

You'd have to ask Dmitri, I'm sure it would be possible to swap between configs. Most old school Simmons stuff had footswitch jacks on the back.

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1197
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: snare with strainer switch

Postby dmitri » Sat Nov 18, 2017 10:03 pm

Unless I understand it wrong, I think MegaDrum already has Program Change functionality using switches as described in Next screen ChXX: PadName->Function: in https://www.megadrum.info/content/pads-settings
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: snare with strainer switch

Postby sixbras » Wed Nov 22, 2017 2:19 pm

Thanks Dimitri, i think the program Change functionality will do the job. :D

Nothing that you can't do with a Megadrum

About the switch, if i understand, it will connect the rim/edge to the ground when the state is "closed" , does it need any resistor to improve detection ?
sixbras
 
Posts: 6
Joined: Thu Jun 02, 2016 9:12 am

Re: snare with strainer switch

Postby dmitri » Wed Nov 22, 2017 7:39 pm

If you do it with one switch then you don't need a resistor but you will be able to change Program Change only in one (upwards) direction. If you do it with two switches then you connect one switch over a 10k resistor. With two switches you will be able to change Program Change in both directions.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm


Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 92 guests