Megadrum Gallery

[WalterWurst]

...not the amateurs like us. Talking about work of encoders - I also used the multimeter to find out the vcc/gnd side of it.

Yeah. I´m the Über-amateur Didn´t help in the moment because I was too angry at me that I forgot the multimeter. That, and I did not know the rotary encoder was so simple to find out by myself. Lesson learned: cool down, go to sleep, try another day. And RTFM .

[studiolion]

Here is my solution for the MD set!
check out the video also .
Cheers
https://youtu.be/iTQEnK3qeXI

[dsteinschneider]

I think I have finished building out my acoustic to electronic kit for the time being. The ride and hi-hat are Yamaha 3 zone. The crashes are all built from $12 Pintech practice cymbals with goedrums prewired piezos and mryk membrane switches for choke. The hi-hat also uses the project boxes I used for the cymbals (Polycase) for the hall effect sensor and TRS jack. Each shell in this Ludwig Accent Combo kit has a UFO Drums 3 ply mesh head, ebridge piezo unit and rim protector. The USB hub, laptop power adapter and Behringer UMC202HD are zip tied underneath an On-Stage MSA 5000 mic stand laptop attachment which is attached to a Pyle laptop stand with a Gator Frameworks Microphone Clip Quick Relase Stand Attachment (GFW-MIC-QRTOP). The MegaDrum is connected to the Pyle laptop stand with a zip tie.

[TeeJay]

Make this a sticky!

Hi, I finished my Megadrum today. It's been really easy thanks to Dmitri and Synthex for the fabulous All-in-one PCB and the usb midi.
I got some help making the pcb's for the jacks from a friend. (Tack Marcus!)

Here's My Megadrum:

Front.jpg

Usb-midi.jpg

Jacks.jpg

inside1.jpg

/Slayer666 \m/

How did you make that case?

[Marcin_kasz]

Hey, I dont see any STM32 version.

Does anybody tried to do it as DYI?

Is the software opensrouce?

[dmitri]

STM32 is only available in kits and module. MegaDrum firmware is not opensource but MegaDrumManagerFX is opensource.

[mrmoos]

Here is my Megadrum Lite build!
Front:

Back:

Inside:

[ibanman555]

Looks sharp! Nice work.

[patoriku]

I'm new here. Looking to get into using megadrum.

Where did you get those pads from?

I detached the monitor`s bottom plate, and its "leg" is hollow. So I sticked a painting brush (yes, you read it right ) in the "leg" and its other side in the rack.
Let me know if you need clarifications

BTW, here are some more pics:

[ibanman555]

These have an Everson emblem, who is actually a forum member here and at vdrums.com. These appear to be an acoustic to electric conversion where an acoustic shell is cut in half, a mesh head installed and a trigger installed, as can be seen here;

https://www.vdrums.com/forum/advanced/d ... on-build-2