I've found the pads on the pcb 2.5 version woefully small, so I'm enlarging them for my next batch of etching.
So my question is by doing so will that do something wacky like changing the polarity or something?
Pads on the PCB.
4 posts
• Page 1 of 1
Pads on the PCB.
by NovaKaine » Thu Jan 08, 2009 6:37 pm
- NovaKaine
- Posts: 150
- Joined: Mon Jun 23, 2008 1:38 pm
- Location: Lancaster Tx.
Re: Pads on the PCB.
by jman 31 » Thu Jan 08, 2009 10:01 pm
Not as long as they don't touch anything that they didn't touch originally. Have you got a working version of the 2.5? I would like to build this one, but I had heard others on the site were having problems getting theirs to work.
- jman 31
- Posts: 536
- Joined: Thu Jul 10, 2008 10:51 pm
- Location: USA
Re: Pads on the PCB.
by Synthex » Thu Jan 08, 2009 10:07 pm
There is a lot of success on the PCB v2.5 !
They are those who complain that we see the most !
They are those who complain that we see the most !
- Synthex
- Posts: 1471
- Joined: Fri Oct 12, 2007 6:06 am
- Location: France
Re: Pads on the PCB.
by NovaKaine » Fri Jan 09, 2009 2:15 pm
After a learning curve I'm soldering my components on now so hopefully I'll be done this weekend.
Kinda slow going because I have 4 boards in various stage of completion.
Kinda slow going because I have 4 boards in various stage of completion.
- NovaKaine
- Posts: 150
- Joined: Mon Jun 23, 2008 1:38 pm
- Location: Lancaster Tx.
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 89 guests