All In One 2.8 Futurlec Ordering list

[bobsagat666]

Here is an ordering list from Futurlec for almost everything needed for the 2.8 all in one kit.

-Not included in list: 1x 6.2K 1/4watt metal film resistor (site does not carry)
4x push buttons (I will be using rotary encoders)
17x 1/4" stereo switched Jacks (being purchased elsewhere)

-For all of us state side with the weak dollar, this will hopefully help out with the recent increase in the kit prices.

All in one Kit prices: Kit 1 55 euros = $72.40 + 35.00+ $6.00 (standard post) = $113.40
Kit 2 80 euros = $105.31
Kit 3 105 euros = $138.22

So this list plus Kit 1 is around $25 cheaper that Kit 3.

Shopping Cart Contents
ITEM NAME ITEM DESCRIPTION QUANTITYPRICEAMOUNT
R100RMF 100ohm 1/4W 1% Metal Film Resistor 2 $ 0.20 $ 0.40
R220RMF 220ohm 1/4W 1% Metal Film Resistor 4 $ 0.20 $ 0.80
R470RMF 470ohm 1/4W 1% Metal Film Resistor 1 $ 0.20 $ 0.20
R001KMF 1kohm 1/4W 1% Metal Film Resistor 3 $ 0.20 $ 0.60
R0047KMF 4.7kohm 1/4W 1% Metal Film Resistor 8 $ 0.20 $ 1.60
R010KMF 10kohm 1/4W 1% Metal Film Resistor 2 $ 0.20 $ 0.40
R047KMF 47kohm 1/4W 1% Metal Film Resistor 4 $ 0.20 $ 0.80
C015PC 15pF 50V Ceramic Capacitors 2 $ 0.05 $ 0.10
C022PC 22pF 50V Ceramic Capacitors 2 $ 0.05 $ 0.10
C100UC 0.1uF 50V Ceramic Capactors 4 $ 0.10 $ 0.40
C220UMC 0.22uF 50V Multilayer Ceramic Capacitor 2 $ 0.15 $ 0.30
C470UMC 0.47uF 50V Multilayer Ceramic Capacitor 2 $ 0.20 $ 0.40
C047U16E 47uF 16V Radial Electrolytic Capacitor 3 $ 0.07 $ 0.21
C100U25E 100uF 25V Radial Electrolytic Capacitor 1 $ 0.08 $ 0.08
IND0010 1.0uH Inductor 1 $ 0.16 $ 0.16
1N4148 1N4148 100V 200mA Diode 3 $ 0.20 $ 0.60
CRY12.000 12.000MHz Crystal 1 $ 0.30 $ 0.30
CRY16.000 16.000MHz Crystal 1 $ 0.30 $ 0.30
ICS8 8 Pin IC Socket 1 $ 0.04 $ 0.04
ICS16 16 Pin IC Socket 4 $ 0.07 $ 0.28
ICS28N 28 Pin IC Socket - Narrow 1 $ 0.14 $ 0.14
ICS40 40 pin IC Socket 1 $ 0.15 $ 0.15
HEADS2 2 Pin .100 Straight Male Headers 3 $ 0.70 $ 2.10
HEADS4 4 Pin .100 Straight Male Headers 1 $ 0.70 $ 0.70
HEADS6 6 Pin .100 Straight Male Headers 5 $ 0.70 $ 3.50
HDCONNS2 2 Pin .100 Header Connector 3 $ 0.10 $ 0.30
HDCONNS4 4 Pin .100 Header Connector 1 $ 0.15 $ 0.15
HDCONNS5 5 Pin .100 Header Connector 4 $ 0.15 $ 0.60
HDCONNS6 6 Pin .100 Header Connector 1 $ 0.18 $ 0.18
HEADD4 4 Pin .100 St. Male Double Headers 1 $ 1.00 $ 1.00
IDCMH16 16 Pin Shrouded Male Headers 1 $ 0.25 $ 0.25
IDCMH40 40 Pin Shrouded Male Headers 1 $ 0.60 $ 0.60
IDCMH40RA 40 Pin Shrouded Rt. Angle Male Headers 2 $ 0.60 $ 1.20
IDCC40 40 Contact IDC Socket Connector 3 $ 0.50 $ 1.50
IDCC16 16 Contact IDC Socket Connector 1 $ 0.25 $ 0.25
ST5PNS DIN 5 Pin Chassis Socket 2 $ 0.80 $ 1.60
PUSB04 USB PC Mount Socket 1 $ 1.15 $ 1.15
GRCABLE40 Grey Ribbon Cable - 40 core 1 $ 1.25 $ 1.25
GRCABLE16 Grey Ribbon Cable - 16 core 1 $ 0.45 $ 0.45
LCD16X2BL 16 x 2 Character LCD Display with BL. 1 $ 7.90 $ 7.90
KNOB2 Black Plastic Round Control 2 $ 0.55 $ 1.10
SPST10 SPST on-off Miniature Toggle Switch 1 $ 0.60 $ 0.60
LEDPMG12V Green Round 12V Panel-Mount LED 1 $ 0.80 $ 0.80

Total price: $ 35.54

-Please comment if you see any errors. thanks!

[dmitri]

Well, if you are a careful DIYer, you can save by making PCBs yourself. I do it myself. You might spend quite some time making them and they probably won't look as professional as Synthex's but they do the job just as well.

Speaking of the weak dollar... Let's see where the pound was half a year ago and where it is now, shall we?:)

[Synthex]

I use Registered airmail with signature required.
Futurlec is $22 for Express Post.

But you're right, I will stop wasting time to gather the necessary components to make this kit.

[bobsagat666]

I use Registered airmail with signature required.
Futurlec is $22 for Express Post.
But you're right, I will stop wasting time to gather the necessary components to make this kit.

Just trying to save a a few bucks. I think i speak for everyone when I say we definitely don't want you to stop offering kits!

Well, if you are a careful DIYer, you can save by making PCBs yourself. I do it myself. You might spend quite some time making them and they probably won't look as professional as Synthex's but they do the job just as well.

Speaking of the weak dollar... Let's see where the pound was half a year ago and where it is now, shall we?:)

I looked into it but the double sided board is just too sexy to pass up!