Question to Synthex regarding mounting the LCD

[jeffbeckib]

The mounting holes on your lcd are smaller than the screws that came with my metal hex style standoffs, and I notice that both mounting holes one one side appear to have a copper ring which leads me to believe that they are to make contact with the screw. I was going to simply drill the mounting hole a little bigger, but I wanted to check with you regarding those 2 mounting holes with the copper rings. Is it ok for me to just make the hole larger? or should I search for smaller standoffs? I haven't seen standoffs in different size screws, just different lenghts. Do LCD's require a different type of standoff?

Thanks,
Leo

[Synthex]

It is not recommended to enlarge the holes because they are Plated Through holes.
It is possible to solder directly on the LCD son.

[jeffbeckib]

It is not recommended to enlarge the holes because they are Plated Through holes.
It is possible to solder directly on the LCD son.

This response is a bit confusing. You do realize I'm referring to the 4 mounting holes, to mount the panel to the enclosure right?

[Synthex]

I'm really too tired right now !

Yes, you can.

[jeffbeckib]

I'm really too tired right now !

Yes, you can.

Boy it's true then what they say. you never sleep do you?